Q: I have an existing key with 5 digit number ***** . Can you make duplicate of this key?

Asked by: Raman Viswanathan - 1/12/2020
A: Yes, we can duplicate your Emtek key with the 5 digit code.
Was this answer helpful?  4 of 5 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (1/13/2020)
Submit an answer

Q: I want to rekey the existing emtek for hardware for 4 door locations. Currently all locks r keyed to one 5 digit key code. Do I need to order new blank keys and call a locksmith to rekey?

Asked by: Donna Jackson - 3/7/2023
A: Yes, you can have a locksmith rekey the locks or you can purchase new cylinders to install in the locks. Send pictures of your locks to [email protected] and I will inform which cylinder is needed for the lock.
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (3/7/2023)
Submit an answer

Q: I would like to make duplicates of EMTEK key serial number ***** which goes to an electronic lock keypad (+lever). Do I use MS4-KEYBLKC or one of the others. Please advise and I will order on your website. Thanks.

Asked by: William J Lansing - 4/28/2020
A: Yes, this key blank is used for Emtek electronic locks.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (4/28/2020)
Submit an answer

Q: To whom it may concern, I want to make copies of a key I have already. Are the numbers engraved on the key itself? Also is it $3 extra for every key that is made? Please let me know as soon as you can. Thank you and have a wonderful day.

Asked by: Cindy - 5/5/2020
A: Yes, the number is on the back of your key and the cost is $3 extra for each key.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (5/6/2020)
Submit an answer

Q: My key is for a front door with no deadbolt and does not have numbers. Can I order blanks keys and have them cut to match?

Asked by: Krys - 7/31/2020
A: Yes, blank keys may be cut to match your Emtek key.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (8/2/2020)
Submit an answer

Q: Do you cut the keys with the 5 digit code.

Asked by: Phil - 10/6/2020
A: Yes, provide your 5 digit code and Emtek will cut the keys.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (10/6/2020)
Submit an answer

Q: Do the Emtek key blanks look exactly like the photo on your website? Thank you.

Asked by: Dan - 12/16/2020
A: Yes, this photo is an Emtek key blank.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (12/17/2020)
Submit an answer

Q: what is the key number of the emtek blank key?

Asked by: ray - 6/16/2021
A: A blank key has no number. Enter your 5 digit code to have it match your existing Emtek key.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (6/16/2021)
Submit an answer

Q: My Emtek key is 2 1/8” overall. Is your duplicate the same length?

Asked by: Bob - 7/10/2022
A: Yes, this Emtek key is 2 1/8” overall.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (7/11/2022)
Submit an answer

Q: I need to purchase 4 more house keys for my new door. The key is a EMTEK ASSA ABLOY and has the number on the back as 41246 . Does the purchase of this key come CUT to match the other two new ones?

Asked by: Al - 10/27/2022
A: Add your key number and the keys will be cut the same as your existing keys.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (10/27/2022)
Submit an answer

Q: I have only one key for our new house that we built. All others have been lost during construction. If I give the number on the blank key request, will you send me keys that are already to go and I don't have to use blank ones. The number on this only key is 72718. Thank you for answering this question.

Asked by: terry sheldrake - 12/27/2022
A: The keys will be cut to the 5 digit number you enter when ordering.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (12/27/2022)
Submit an answer

Q: can these blanks be cut to fix non emtek locks?

Asked by: Lisa - 10/24/2023
A: The keys are only guaranteed to fit Emtek locks.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (10/25/2023)
Submit an answer

Q: I would like to have my keys cut. The # is 54755. Not sure if $5.00 buys a cut key or blank and how do I get a cut key?

Asked by: Tom Styruthers - 11/28/2023
A: Enter your 5 digit key number in the option box and the keys will be cut to that number.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (11/28/2023)
Submit an answer

Q: I have Emtek Assa Abloy door key entrance that I would like to make copies of. Local hardware stores cannot make the correct key replacement. The number on the original key I have is 85464. Do you have this key replacement?

Asked by: Juwita Seman - 1/20/2024
A: Enter the 5 digit number in the Key Number Box and the keys will be cut to your existing key.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (1/20/2024)
Submit an answer

Q: Do I have to have an EMTEK blank key to make a duplicate? or is there another blank that will work? I need one pretty quick.

Asked by: LisaL - 1/27/2025
No Answers have been submitted yet.
Submit an answer