Q: Would this fit an Emtek tubular style (deadbolt portion) door handle set? Are the Emtek deadbolt lock cylinders pretty much interchangeable with replacement Emtek lock cylinders?

Asked by: Linsey Dale - 6/13/2018
A: Yes, this cylinder will replace the deadbolt cylinder in an Emtek single cylinder tubular entry set.
Was this answer helpful?  5 of 6 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (6/13/2018)
Submit an answer

Q: Can Emtek CY4-PSCHCTS5 Deadbolt Single Cylinder replace the key portion of emtek 4313 (Richmond Doorset)? Also, would the key be a unique key pattern different from the one that is on my original door set?

Asked by: Simon - 2/8/2020
A: This cylinder will replace the key portion of Emtek 4313 Richmond Tubular Handleset. The cylinder will have a key pattern different from the one on your original set, unless you provide your 5 digit key number to have the cylinder keyed the same.
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (2/8/2020)
Submit an answer

Q: I have an EMTEK front entry 'Rectangular Monolithic Sandcast Bronze Tubular Entryset' with Durango lever in Flat Black finish door hardware (with single Cylinder: 451512). Current key cylinder is broken. Can this product be used to fix the current broekn cylinder.

Asked by: Terry - 3/31/2021
A: Yes, this cylinder will work with Emtek Rectangular Monolithic Sandcast Bronze Tubular single cylinder handle set.
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (3/31/2021)
Submit an answer

Q: I have a jammed cylinder on an oil rubbed bronze Emtek Davos entrance set. What part(s) do I need? It has only one single cylinder deadbolt.

Asked by: Michael - 12/9/2019
A: This cylinder fits an Emtek single cylinder handleset or deadbolt and will work with your Davos single cylinder handle set.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (12/9/2019)
Submit an answer

Q: will this cylinder fit in the Hamilton Mortise deadbolt? my hardware is not the exact same as Hamilton Mortise but looks very close. it is emtek.

Asked by: Robert Vaughn - 3/6/2020
A: This cylinder fits the Orleans, which is the tubular version of the Hamilton Mortise Handleset.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (3/6/2020)
Submit an answer

Q: Does this part work on the thicker door deadbolts

Asked by: Eddy - 3/18/2020
A: Add your door thickness to the comment section in checkout and we will make sure the tail piece is the correct length.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (3/18/2020)
Submit an answer

Q: Will this cylinder fit the Emtek Jefferson Single Cylinder Handleset?

Asked by: RayC - 4/4/2020
A: Yes, this cylinder fits a Jefferson Single Cylinder Handleset?
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (4/6/2020)
Submit an answer

Q: Will this CY4-PSCHCTS5 replace the cylinder in a box store kwikset deadbolt. I'm trying to key all my locks the same without replacing handles.

Asked by: TimJ - 5/1/2020
A: This cylinder will not work with Kwikset.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (5/1/2020)
Submit an answer

Q: Will this work with the Victoria (8091). Also what is the replacement dead-latch for the Victoria

Asked by: RW - 6/16/2020
A: Yes, this will work with a Victoria 8090 but not a 8091.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (6/17/2020)
Submit an answer

Q: I need the pin tail to be 1.7/8

Asked by: Yorem gigi - 7/11/2020
A: Enter your door thickness and tail piece length in the comment section of checkout.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (7/11/2020)
Submit an answer

Q: Hi, will this work for Emtek 4812 Arts & Crafts Full Length Tubular Entrance Handleset? Please let me know asap. Thanks. Max

Asked by: Max - 7/11/2020
A: This cylinder will work with an Emtek 4812 Arts & Crafts Full Length Tubular Entrance Handleset
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (7/12/2020)
Submit an answer

Q: I have an existing Emtek lock that had to be drilled out. I'm looking for a replacement cylinder. If I give you the number, can I get a cylinder that will fit my key?

Asked by: Joel - 7/29/2020
A: Yes, enter your 5 digit key code when ordering the cylinder.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (7/30/2020)
Submit an answer

Q: Does this fit a low profile emtek deadbolt? Thank you.

Asked by: Theresa Jurotich - 8/7/2020
A: Yes, this will work with an 8455 Emtek Low Profile Single Cylinder Deadbolt.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (8/8/2020)
Submit an answer

Q: Does this match the Emtek 4820 Baden?

Asked by: Blanca Reyes - 10/4/2020
A: Yes, this cylinder works with Emtek 4820.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (10/4/2020)
Submit an answer

Q: does this fit Emtek lockset 4911

Asked by: Jean Pierre Bourliot - 11/24/2020
A: Yes, this cylinder will work with Emtek 4911 Imperial Tubular Handleset
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (11/24/2020)
Submit an answer

Q: Is this a 5 pin cylinder based on a Schlage keyway? All I really need is the little pin that retains the threaded retainer at the end of the cylinder- the retainer ring that holds the key cylinder inside the barrel and keeps it from loosening, It's different from a Schlage and parts from a Schlage lock will not fit.

Asked by: Warren - 12/20/2020
A: Yes, this is a 5 pin cylinder based on a Schlage keyway.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (12/21/2020)
Submit an answer

Q: What is the difference between Emtek CY4-PSCHCTS2 and Emtek Emtek CY4-PSCHCTS5? Are they both compatible with Emtek 8455US3 (Emtek low profile style single cylinder deadbolt).

Asked by: Palo Alto - 12/31/2020
A: The CY4-PSCHCTS5 fits a single cylinder deadbolt or handleset and CY4-PSCHCTS2 fits a keyed knob or lever.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (12/31/2020)
Submit an answer

Q: Emtek Deadbolt Single Cylinder CY4-PSCHCTS5 I have two deadbolts that are keyed alike but have lost the keys. They were bought in 2003. Was hoping that i could use CY4-PSCHCTS5 for there replacement.

Asked by: rob - 1/17/2021
A: Yes, this cylinder is a replacement for an Emtek single cylinder deadbolt.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (1/17/2021)
Submit an answer

Q: Will this cylinder fit a Rockwell deadbolt?

Asked by: Richard Gibbs - 4/18/2021
A: This cylinder is made to work with Emtek Brand hardware.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (4/18/2021)
Submit an answer

Q: Does this fit the Emtek Marietta entry set.

Asked by: Lisa - 5/13/2021
A: Yes, this fits the Emtek Marietta single cylinder handle set.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (5/13/2021)
Submit an answer

Q: I have three keyed lever handle with keypad and key cylinders. Two are rubbed bronze and one is brushed nickel. Also have a front door latch with keypad and keyed deadbolt, dark oil rubbed brass. Will the same key-cylinder work for these two different types of locks? I need to replace all four with new lock tumblers and keys as one of our keys was lost.

Asked by: Richard Bell - 5/27/2021
A: This cylinder works with an Emtek keypad leverset and deadbolt.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (5/27/2021)
Submit an answer

Q: I have Emtek Regency lock and key is not smooth. Trouble to insert and take it out. Will this cylinder fit my lock. I have the Original key number.

Asked by: Lucky - 7/8/2021
A: Yes, this cylinder will fit an Emtek Regency single cylinder lock.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (7/8/2021)
Submit an answer

Q: How is the existing cylinder removed?

Asked by: Kandi - 8/7/2021
A: The cylinder is removed by releasing the screw on the back of the housing.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (8/9/2021)
Submit an answer

Q: Is this compatible with the Emtek 4811 Arts & Crafts Tubular Entry Handleset?

Asked by: LS - 8/10/2021
A: Yes, this cylinder is compatible with Emtek 4811 Arts & Crafts Tubular Single Cylinder Handleset.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (8/10/2021)
Submit an answer

Q: How can I tell if I have a single or double cylinder dead bolt?

Asked by: Fred T Venhoff - 1/17/2022
A: Single cylinder deadbolts are keyed on one side and have a thumb turn on the opposite side. Double cylinder deadbolts are keyed on both sides.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (1/17/2022)
Submit an answer

Q: I am looking to replace the key cylinder for an Emtek 8450 single key deadbolt, will this unit (CY4-PSCHCTS5) fit?

Asked by: Jon - 2/24/2022
A: Yes, this works with Emtek 8450.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (2/24/2022)
A: Yes, this works with Emtek 8450.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (2/24/2022)
Submit an answer

Q: Can I use this cylinder to replace existing cylinder in EMTouch™ Keypad Deadbolt? Just purchased house and want to change actual key in addition to changing codes.

Asked by: Gary - 6/27/2022
A: Yes, this cylinder works with an EMTouch™ Keypad Deadbolt.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (6/27/2022)
Submit an answer

Q: will this work on emtek san carlos full plate handle

Asked by: Douglas Hasskamp - 10/31/2022
A: This will work if your handle set in single cylinder. Please, email a picture of the interior side of your handle set to [email protected] .
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (10/31/2022)
Submit an answer

Q: I need to replace 3 of my current emtek locks on entrances with same key. I was hoping I can just replace cylinders. Please help.

Asked by: Maya Persons - 8/18/2024
A: Please, send pictures of your locks to [email protected] and I can advice which cylinders are needed.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (8/18/2024)
Submit an answer

Q: does this have 1-1/4" tailpiece? is this to be keyed alike to schlage c keyway?

Asked by: Bart - 2/14/2025
A: The tail piece for standard door thickness is 1 1/2". The tail piece may be cut shorter if needed. It is Schlage C keyway.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (2/14/2025)
Submit an answer

Q: Hi, Can this cylinder work on door thickness of 1 7/8? Thanks.

Asked by: Jiang Ding - 8/19/2025
A: Door thickness may be noted in the comment section at the bottom of the check out page so it is built for your specific door thickness.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Dee Meeks (8/19/2025)
Submit an answer

Q: does the Emtek CY4-PSCHCTS5 Deadbolt Single Cylinder come with EMTEK branded keys(2) and what is the housing for an extra cost look like? I just need what in the picture online. Cylinder ad 2 EMTEK keys.

Asked by: phil - 5/15/2026
No Answers have been submitted yet.
Submit an answer